Usage |
Standard switch for extraction systems, concrete mixers, drills, etc. |
|
Description - Art. No.: 204.959 (see below for details of other switch versions) |
- toggle-actuated 2-pole On/Off switch (0 – 1) |
- with transparent PVC cover over ON/OFF buttons |
- plug shroud shock proof 2P+E with plug lock |
- housing for surface-mounting on motor terminal box (bottom section open) |
|
Technical data |
mains data Ue: |
1 / N / PE, 230V / 50Hz |
switching capacity AC 3: |
250V / 8A |
mains outlet: |
plug shroud shock proof 2P+E with red plug lock (prevents the shock-proof coupling falling out of the plug shroud) |
motor litz outlet: |
1 litz wire, green and yellow with wire-end claw approx. 130 mm long, 2 litz wires, blue and brown with wire-end claws approx. 120 mm long |
protection type: |
IP 54 (protection from dust deposits and spraying water) |
switch location: |
on the right-hand side (looking at plug shroud) |
switch design: |
open – opening in bottom section 68 x 68mm |
switch fastening: |
4 bushing boreholes Ø 6 mm - 68 x 68mm |
material / color: |
polypropylene PP / housing black, polyamide PA / plug shroud blue |
dimensions (LxWxH): |
approx. 122 x 87 x 100mm including bottom section H=15mm |
weight: |
approx. 140g |
Wiring diagram |
851.566.pdf |
 |
|
|
|
Other switch version (Art. No. 204.960) like 204.959 but with the following differences: |
with additional low voltage release / contactor switch (UA) and designed coil connector |
Technical data |
switching capacity AC 1: |
230V / 16A (TÜV Rheinland), 250V / 10A (VDE) |
switching capacity AC 3: |
230V / 15A (TÜV Rheinland), 250V / 8A (VDE) |
motor litz wires: |
1 litz wire, green and yellow with wire-end claw approx. 130 mm long, 3 litz wires, blue, brown and black with wire-end claws approx. 120 mm long |
dimensions (LxWxH): |
approx. 122 x 97 x 100mm including bottom section H=15 mm |
weight: |
approx. 205g |
Wiring diagram |
851.567.pdf, INFO to low voltage release |
|
|
Abbreviation: |
|
UA |
low voltage release / contactor |