Motor starter D 230V - surface switch

Motor starter D 230V with Schuko plug 2P+E Motor starter D 230V with Schuko plug 2P+E Schuko plug 2P+E
item number: See article variants
Usage 
Standard switch for concrete mixers, drills, stone cutting machi nes, saws, etc.  
   
Description - Art. No. 204.983 (see below for details of other switch versions) 
- On/Off switch (0 – 1) 
- plug shroud shock proof 2P+E with plug lock
- low voltage release / contactor (UA)   
- with connector for thermal contact / winding thermostat (TK) 
- with transparent PVC cover over ON/OFF buttons  
- housing for surface on motor terminal box (bottom section open)
   
Technical data    
mains data Ue: 1 / N / PE, 230V / 50Hz
switching capacity AC - 1: 230V / 16A / 6kW
switching capacity AC - 3: 230V / 13,5A / 3kW
overload protection: connector for thermal contact in motor
mains outlet: plug shroud shock proof 2P+E with red plug lock (prevents the shock-proof coupling falling out of the plug shroud)
motor litz outlet: 1 litz wire, green and yellow with wire-end claw approx. 130mm long, litz wires, blue  and brown with wire-end claws approx. 120mm long
protection type:     IP 54 (protection from dust deposits and spraying water)
switch design: open – opening in bottom section 68 x 68mm
switch fastening: 2 bushing boreholes (diagonal) Ø 5.3mm - 68 x 68mm
material / color: polypropylene PP / Housing black, polyamide PA / Plug shroud red
dimensions (LxWxH): approx. 128 x 95 x 123mm including bottom section H=15 mm
weight:                                 approx. 550 to 750g depending on version
Wiring diagram  851.578.pdf,   INFO to low voltage release
Dieses Tripusprodukt wird in Europa hergestellt  - Made in Europe by TRIPUS
   
Other switch version (Art. No. 204.984...) like 204.983 but with the following differences:
with additional low voltage release (ÜLS)
Technical data  
overload protection: 8, 10, 12 or 14A with automatic reset
motor litz wires: 1 litz wire, green and yellow with wire-end claw 130mm long, 3 litz wires, black, brown and gray  with wire-end claws 95mm long
   
Abbreviation:  
UA low voltage release / contactor
TK thermal contact
ÜLS overload release
Variante Art. Nr. from 1 unit amount  
UA + TK 204P983 52,00 € Shopping cart
UA + ÜLS 8A 204P984.08 61,00 € Shopping cart
UA + ÜLS 10A 204P984.10 61,00 € Shopping cart
UA + ÜLS 12A 204P984.12 61,00 € Shopping cart
UA + ÜLS 14A 204P984.14 61,00 € Shopping cart
(incl. of 19% VAT, plus shipping and handling)
Adequate accessories for this article:
Motor starter A 230V with Schuko plug 2P+E

Motor starter A 230V - surface switch

item number: See article variants
Line: 1 / N / PE, 230V / 50Hz, breaking capacity AC-3: 8A / 250V, switch function: 0 - 1, line inlet: Schuko plug 2P+E, other switch version: line: 1 / N / PE, 230V / 50Hz, breaking capacity AC-3: 13,5A / 230V, switch function: 0 - 1, low voltage release
from EUR 32,00
Bottom sections (open versions) for direct motor mounting for motor starters from series A and D

Bottom sections (open versions) for direct motor mounting for motor starters from series A and D

item number: See article variants
With or without overload protection, capacitor cartridge etc., size: L=86 x B=86 x H=33mm
from EUR 5,50
Bottom sections (closed versions) for motor starters from series A and D

Bottom sections (closed versions) for motor starters from series A and D

item number: See article variants
With or without overload protection, capacitor cartridge etc., size: L=86 x B=86 x H=33mm
from EUR 12,50
Push button cover with stop button and with lock function

Push button cover with stop button and with lock function

item number: See article variants
Push button cover, fits Tripus switch plug combinations
from EUR 4,00
Metric cable gland with brass nut

Cable glands

item number: See artikel variants
Metric cable gland with brass nut
from EUR 0,50
Back