item number: see article variants
Usage
Standard switch for concrete mixers, drills, stone cutting machines, saws, etc.
Description - Art. No. 204.954... (see below for details of other switch versions )
Details
3-pole On/Off switch with 2-pole overload protection (without low voltage release)
- On / Off switch (0 – 1)
- plug shroud CEE 5-pole with phase inverter
- overload release (ÜLS) in switch with automatic reset
- with transparent PVC cover over ON / OFF buttons
- built-on switch (sealed switch version, for wall or metal plate mounting)
Technical data
mains data Ue: 3 / N / PE, 400V / 50Hz
switching capacity 415V / 4A...10A (depending on overload protection version)
overload protection: 4, 5, 7 oder 10A with automatic reset (see product versions)
mains outlet: phase inverter plug CEE 5-pole, 6h, 3P+N+E, 16 A, 400 V (adjustable from the front using a screwdriver)
motor cable:
approx. 1m long, H07RN-F 4G1.5mm²
1 litz wire, green and yellow with wire-end claw 130mm long, 3 litz wires, black, brown and gray with wire-end claws 95mm long
motor cable outlet: front (looking at plug shroud) – bottom section can be cycled through 90°
protection type: IP 54 (protection from dust deposits and spraying water)
switch design: sealed / mounted switch
switch fastening: 2 bushing boreholes (diagonal) Ø 5.3 mm - 68 x 68 mm
material / color: polypropylene PP / housing black, polyamide PA / plug shroud red
dimensions (LxWxH): approx. 128 x 95 x 141mm including bottom section 33mm
weight: approx. 680 to 760g depending on version
Wiring diagram: 851.560.pdf ,
Other switch version (Art. No. 204.955) like 204.954... with the following differences:
with additional low voltage release / contactor (US) and connector for thermal contact (TK)
Details
low voltage release: 400V / 50Hz
switching capacity 400V / 16A / 11kW
switching capacity 400V / 9A / 4kW
overload protection:
connector for thermal contact in motor
motor cable:
approx. 1m long, H07RN-F 5G1.5mm²
1 litz wire, green and yellow with wire-end claw 130mm long, 4 litz wires, black, blue, brown and gray with wire-end claws 95mm long
Wiring diagram:
850.561.pdf , INFO to the low voltage release,
Other switch version (Art. No. 207.019) like 204.955 but with the following differences:
with additional pump connection and / or with limit switch
Details
beside the motor cable outlet is a second cable outlet with a cable gland M16 x 1,5mm (without cable) and a 5-pole terminal strip as plug-in module with terminal markings (PE, 1, 2, 3, 4)
Motor cable:
approx. 1m long, H07RN-F 7G1.5mm² (1 core cut off)
1 litz wire, green and yellow with wire-end claw 130mm long, 5 litz wires, black, blue, brown, red and withe with wire-end claws 95mm long
Wiring diagram: 851.595.pdf , INFO to the low voltage release,
Other switch version (Art. No. 204.956...) like 204.954... but with the following differences:
with additional low voltage release / contactor (UA) and overload protection release (ÜLS)
Details
low voltage release: 400V / 50Hz
switching capacity 400V / 16A / 11kW
switching capacity 400V / 9A / 4kW
overload protection: 4, 5, 7 oder 9A with automatic reset (see product versions)
motor cable:
approx. 1m long, H07RN-F 7G1.5mm² (1 core cut off)
1 litz wire, green and yellow with wire-end claw 130 mm long, 5 litz wires, black, brown, red, lila and white with wire-end claws 95 mm long
Wiring diagram: 850.562.pdf , INFO to the low voltage release,
Other switch version (Art. No. 204.957...) like 204.954... but with the following differences:
with additional low voltage release / contactor (US) and connector for thermal contact (TK) and direct current brake
Details
low voltage release: 400V / 50Hz
switching capacity 400V / 16A / 11kW
switching capacity 400V / 9A / 4kW
overload protection: connector for thermal contact in motor
braking module: direct current brake with all-pole disconnection (isolation)
braking current: max. 15A (infinitely adjustable from the outside using potentiometer)
braking time: approx. 1 – 20s, infinitely adjustable using potentiometer
motor cable:
approx. 1m long, H07RN-F 7G1.5mm² (1 core cut off)
1 litz wire, green and yellow with wire-end claw 130 mm long, 5 litz wires, black, brown, red, lila and white with wire-end claws 95 mm long
Wiring diagram: 851.563.pdf , INFO to the low voltage release, INFO to the brake
Other switch version (Art. No. 204.958...) like 204.954... but with the following differences:
with additional low voltage release / contactor (UA) and overload protection release (ÜLS) and direct current brake
Details
low voltage release: 400V / 50Hz
switching capacity 400V / 16A / 11kW
switching capacity 400V / 9A / 4kW
overload protection: 5, 7 oder 9A with automatic reset (see product versions)
braking module: direct current brake with all-pole disconnection (isolation)
braking current: max. 15A (infinitely adjustable from the outside using potentiometer)
braking time: approx. 1 – 20s, infinitely adjustable using potentiometer
motor cable:
approx. 1m long, H07RN-F 4G1.5mm²
1 litz wire, green and yellow with wire-end claw 130mm long, 3 litz wires, black, brown and gray with wire-end claws 95mm long
article variants Art. Nr. from 1 unit amount
3-pole switch + ÜLS 4A
204P954.04
90,00 €
3-pole switch + ÜLS 5A
204P954.05
90,00 €
3-pole switch + ÜLS 7A
204P954.07
90,00 €
3-pole switch + ÜLS 10A
204P954.10
90,00 €
UA + TK
204P955
57,00 €
UA + TK + 2. cable outlet
207P019
75,00 €
UA + ÜLS 4A
204P956.04
84,00 €
UA + ÜLS 5A
204P956.05
84,00 €
UA + ÜLS 7A
204P956.07
84,00 €
UA + ÜLS 9A
204P956.09
84,00 €
UA + TK + brake
204P957
114,50 €
A + ÜLS 5A + brake
204P958.05
129,00 €
A + ÜLS 7A + brake
204P958.07
129,00 €
A + ÜLS 9A + brake
204P958.09
129,00 €
851.560.pdf,
